home > instrument valve overview > VALVE MANIFOLD > 2VM01-SERIES  
   

2VM01 Series 2 Valve Manifold
IN-LINE 2 VALVE MANIFOLD, HARD SEAT, PIPE TO PIPE, 6000PSI


Overview

2 valve manifolds are supplied in 316 stainless steel and produced in pipe to pipe threaded connections.  The 2VM01 series offer single process isolation and venting control and are designed with a metal seat for severe working conditions.  Vent port is plugged as standard.

Features

  • Non-rotating stem plug moves axially into and out of the seat without rotation to eliminate seat galling.
  • The stem thread are rolled and lubricated to prevent galling and reduce operating torque.
  • Valves are assembled with standard T-bar handles.
  • All bonnets are assembled with a locking pin to prevent accidental removal while in service.
  • Teflon packing can be adjusted to increase valve life.
  • Stem packing below the threads prevent from the contaminant by process.
  • The valves feature safety back seating to ensure a secondary stem seal.
  • Dust caps are fitted to contain stem lubricant and prevent the ingress of contaminants.
  • All valves are hydrostatically tested to 1.5 times maximum working pressure prior to shipment.
  • The valves are heat code traceable.